Reinforcement and backing fabric

Technical textiles made of glass, polyester and other yarns


  • With weights of 20 – 1.000 g/m2
  • With mesh sizes from 0 – 25 mm
  • With a thickness of 0.2 – 2.0 mm
  • With a tensile strength up to 10,000 N/5 cm
  • With a width of 30 – 3,200 mm
  • And roll lengths of 10 – 6,000 linear metres


As raw fabric, finished to stabilise the weave construction and


  • alkali-resistant
  • flame-retardant and non-flammable
  • Based on a wide selection of different binding agents
  • In a wide variety of colors


Also as lamination with


  • Glass mat of 30 – 300 g/m2 (also non-flammable)
  • and other textiles


While reinforcement fabric is primarily known for its high dimensional stability and strong tear resistance with low elongation, backing fabrics have higher bending, kinking and shearing resistances. Fire protection can be achieved by both constructions.

Application areas

  • PLASTER
  • PANELS
  • ROOFING AND SEALING MEMBRANES
  • LIQUID AND FLOOR COATING
  • PANEL HEATINGS
  • OTHER
  • suitable
  • unsuitable


Just ask us.–
We create solutions!

P +49 (0) 36762 890 0
technical-textiles@vitrulan.com

We are pleased that you are interested in our products and services we offer online at vitrulan.com. In order to provide you with the best possible service, we store information about your visit in "cookies". By continuing to use our website, you agree to our use of these cookies.

OK More information